AZM201Z-SK-T-1P2PW-A-DU SCHMERSAL HÃNG SCHMERSAL VIỆT NAM
CUNG CẤP HÀNG CHÍNH HÃNG SCHMERSAL VIỆT NAM : PITES VỆT NAM
LH : 0916.597.556
Mô tả
AZM201Z-SK-T-1P2PW-A-DU SCHMERSAL HÃNG SCHMERSAL VN
CUNG CẤP HÀNG CHÍNH HÃNG SCHMERSAL VIỆT NAM : PITES VỆT NAM
LH : 0916.597.556
ZM201Z-SK-T-1P2PW-A-DU”Sức mạnh để khóaVỏ nhựa nhiệt dẻo
Tối đa chiều dài của chuỗi cảm biến 200 m
Tự giám sát hệ thống dây điệnMã hóa theo ISO 14119 bằng cách sử dụng Công nghệ RFID3 đèn LED để hiển thị điều kiện hoạt động
Công nghệ cảm biến cho phép độ lệch giữa bộ truyền động
và khóa liên động là ± 5 mm theo chiều dọc
và ± 3 mm theo chiều ngangThích hợp cho bảo vệ có bản lề và trượt
“” Chẩn đoán thông minhPhát hành thủ côngLớp bảo vệ IP66,
IP67Lực giữ cao 2000hình thức xây dựng đối xứng, lắp ráp trên các cấu hình 40mmĐầu ra an toàn OSSDThoát khẩn cấp / Thoát khẩn cấp phù hợp để trang bị thêm “
Ordering data AZM201Z-SK-T-1P2PW-A-DU SCHMERSAL HÃNG SCHMERSAL VN |
||
| Product type description | AZM201Z-SK-T-1P2PW-A-DU | |
| Article number (order number) | 103044811 | |
| EAN (European Article Number) | 4.03066E+12 | |
| eCl@ss number, version 9.0 | 27-27-26-03 | |
| eCl@ss number, version 11.0 | 27-27-26-03 | |
| eCl@ss number, version 12.0 | 27-27-26-03 | |
| ETIM number, version 7.0 | EC002593 | |
| ETIM number, version 6.0 | EC002593 | |
| Approvals – Standards | ||
| Certificates | TÜV cULus EAC FCC IC |
|
| General data | ||
| Standards | EN ISO 13849-1 EN ISO 14119 IEC 60947-5-1 IEC 60947-5-3 IEC 61508 IEC 62061 |
|
| Coding | Universal coding | |
| Coding level according to ISO 14119 | Low | |
| Working principle | RFID | |
| Enclosure material | Glass-fibre, reinforced thermoplastic | |
| Gross weight | 584.3 g | |
| Time to readiness, maximum | 4,000 ms | |
| Duration of risk, maximum | 200 ms | |
| Reaction time, switching off safety outputs via actuator, maximum | 100 ms | |
| Reaction time, switching off safety outputs via safety inputs, maximum | 0.5 ms | |
| General data – Features | ||
| Power to lock | Yes | |
| Solenoid interlock monitored | Yes | |
| Manual release | Yes | |
| Short circuit detection | Yes | |
| Cross-circuit detection | Yes | |
| Series-wiring | Yes | |
| Safety functions | Yes | |
| Integral system diagnostics, status | Yes | |
| Number of safety contacts | 2 | |
| <table><tr><td>Safety classification</td></tr></table> | ||
Standards |
EN ISO 13849-1 IEC 62061 IEC 61508 |
|
| Safety classification – Interlocking function | ||
| Performance Level, up to | e | |
| Category | 4 | |
| PFH value | 1.90 x 10⁻⁹ /h | |
| PFD value | 1.60 x 10⁻⁴ | |
| Safety Integrity Level (SIL), suitable for applications in | 3 | |
| Mission time | 20 Year(s) | |
| Safety classification – Guard locking function | ||
| Performance Level, up to | d | |
| Category | 2 | |
| PFH value | 1.00 x 10⁻⁸ /h | |
| PFD value | 8.90 x 10⁻⁴ | |
| Safety Integrity Level (SIL), suitable for applications in | 2 | |
| Mission time | 20 Year(s) | |
| Mechanical data | ||
| Mechanical life, minimum | 1,000,000 Operations | |
| Holding force in accordance with EN ISO 14119 Fzh | 2,000 N | |
| Holding force, maximum Fmax | 2,600 N | |
| Latching force | 30 N | |
| Actuating speed, maximum | 0.2 m/s | |
| Mechanical data – Connection technique | ||
| Type of connection | Screw terminals M20 x 1.5 | |
| Cable section, minimum | 0.25 mm² | |
| Cable section, maximum | 1.5 mm² | |
| Note (Cable section) | All indications including the conductor ferrules. | |
| Wire cross-section, minimum | 23 AWG | |
| Wire cross-section, maximum | 15 AWG | |
Mechanical data – Dimensions AZM201Z-SK-T-1P2PW-A-DU SCHMERSAL HÃNG SCHMERSAL VN |
||
| Length of sensor | 50 mm | |
| Width of sensor | 40 mm | |
| Height of sensor | 220 mm | |
| Ambient conditions | ||
| Degree of protection | IP67 IP66 |
|
| Ambient temperature, minimum | -25 °C | |
| Ambient temperature, maximum | +60 °C | |
| Storage and transport temperature, minimum | -25 °C | |
| Storage and transport temperature, maximum | +85 °C | |
| Relative humidity, minimum | 30 % | |
| Relative humidity, maximum | 95 % | |
| Note (Relative humidity) | non-condensing | |
| Resistance to vibration to EN 60068-2-6 | 10 … 150 Hz, amplitude 0.35 mm | |
| Restistance to shock | 30 g / 11 ms | |
| Protection class | III | |
| Ambient conditions – Insulation values | ||
| Rated insulation voltage Ui | 32 VDC | |
| Rated impulse withstand voltage Uimp | 0.8 kV | |
| Overvoltage category | III | |
| Degree of pollution to VDE 0100 | 3 | |
| Electrical data | ||
| Operating voltage, minimum | 20.4 VDC | |
| Operating voltage, maximum | 26.4 VDC | |
| No-load supply current, maximum I0 | 50 mA | |
| Current consumption with magnet ON, average | 200 mA | |
| Current consumption with magnet ON, peak | 700 mA / 100 ms | |
| Operating current | 1,200 mA | |
| Switching frequency, approx. | 1 Hz | |
| Electrical data – Magnet control | ||
Switching thresholds |
-3 V … 5 V (Low) 15 V … 30 V (High) |
|
| Classification ZVEI CB24I, Sink | C0 | |
| Classification ZVEI CB24I, Source | C1 C2 C3 |
|
| Electrical data – Safety digital inputs | ||
| Switching thresholds | −3 V … 5 V (Low) 15 V … 30 V (High) |
|
| Classification ZVEI CB24I, Sink | C1 | |
| Classification ZVEI CB24I, Source | C1 C2 C3 |
|
| Electrical data – Safety digital outputs | ||
| Rated operating current (safety outputs) | 250 mA | |
| Voltage drop Ud, maximum | 4 V | |
| Leakage current Ir | 0.5 mA | |
| Voltage, Utilisation category DC-13 | 24 VDC | |
| Current, Utilisation category DC-13 | 0.25 A | |
| Classification ZVEI CB24I, Source | C2 | |
| Classification ZVEI CB24I, Sink | C1 C2 |
|
| Electrical data – Diagnostic outputs | ||
| Operating current | 50 mA | |
| Voltage drop Ud, maximum | 4 V | |
| Voltage, Utilisation category DC-13 | 24 VDC | |
| Current, Utilisation category DC-13 | 0.05 A | |
Status indication AZM201Z-SK-T-1P2PW-A-DU SCHMERSAL HÃNG SCHMERSAL VN |
||
| Note (LED switching conditions display) | Operating condition: LED green Error / functional defect: LED red Supply voltage UB: LED green |
|
| Scope of delivery | ||
| Scope of delivery | Actuators must be ordered separately. Triangular key for AZM 201 |
|
| Accessory | ||
| Recommendation (actuator) | AZ/AZM201-B1 AZ/AZM201-B30 |
|
| Note | ||
| Note (General) | As long as the actuating unit remains inserted in the solenoid interlock, the unlocked safety guard can be relocked. In this case, the safety outputs are re-enabled, so that the safety guard must not be opened. | |
XEM THÊM SẢN PHẨM KHÁC : http://pilz-vietnam.com/
Đánh giá (0)
Hãy là người đầu tiên nhận xét “AZM201Z-SK-T-1P2PW-A-DU SCHMERSAL HÃNG SCHMERSAL VIỆT NAM”
Sản phẩm tương tự
LE25CI XR1 4P-M8 HÃNG LEUZE Bộ thu cảm biến quang điện qua tia
Đánh giá
Chưa có đánh giá nào.