AZM201Z-SK-T-1P2PW-A SCHMERSAL HÃNG SCHMERSAL VIỆT NAM
Mô tả
AZM201Z-SK-T-1P2PW-A SCHMERSAL HÃNG SCHMERSAL VIỆT NAM
CUNG CẤP HÀNG CHÍNH HÃNG SCHMERSAL VIỆT NAM : PITES VỆT NAM
LH : 0916.597.556
Chẩn đoán thông minh
Phát hành thủ công
Lớp bảo vệ IP66, IP67
Lực giữ cao 2000
hình thức xây dựng đối xứng, lắp ráp trên các cấu hình 40mm
Đầu ra an toàn OSSD
Thoát khẩn cấp / Thoát khẩn cấp thích hợp để trang bị thêm
XEM THÊM SẢN PHẨM : http://pilz-vietnam.com/
|
|
Power to lock Thermoplastic enclosure Max. length of the sensor chain 200 m Self-monitoring series-wiring Coding in accordance to ISO 14119 by using RFID-Technology 3 LEDs to show operating conditions Sensor technology permits an offset between actuator and interlock of ± 5 mm vertically and ± 3 mm horizontally Suitable for hinged and sliding guards |
Intelligent diagnosis Manual release Protection class IP66, IP67 High holding force 2000 symmetrical construction form, assembly on 40mm profiles OSSD safety outputs Emergency exit / Emergency release suitable for retrofitting |
|
Ordering data AZM201Z-SK-T-1P2PW-A SCHMERSAL HÃNG SCHMERSAL VIỆT NAM |
|||
| Product type description | AZM201Z-SK-T-1P2PW-A | ||
| Article number (order number) | 103016752 | ||
| EAN (European Article Number) | 4.03066E+12 | ||
| eCl@ss number, version 9.0 | 27-27-26-03 | ||
| eCl@ss number, version 11.0 | 27-27-26-03 | ||
| eCl@ss number, version 12.0 | 27-27-26-03 | ||
| ETIM number, version 7.0 | EC002593 | ||
| ETIM number, version 6.0 | EC002593 | ||
| Approvals – Standards | |||
| Certificates | TÜV cULus EAC FCC IC |
||
| General data | |||
| Standards | IEC 60947-5-1 EN ISO 13849-1 IEC 61508 IEC 60947-5-3 EN ISO 14119 IEC 62061 |
||
| Coding | Universal coding | ||
| Coding level according to ISO 14119 | Low | ||
| Working principle | RFID | ||
| Enclosure material | Glass-fibre, reinforced thermoplastic | ||
| Gross weight | 584.3 g | ||
| Time to readiness, maximum | 4,000 ms | ||
| Duration of risk, maximum | 200 ms | ||
| Reaction time, switching off safety outputs via actuator, maximum | 100 ms | ||
| Reaction time, switching off safety outputs via safety inputs, maximum | 0.5 ms | ||
| General data – Features | |||
| Power to lock | Yes | ||
| Solenoid interlock monitored | Yes | ||
| Manual release | Yes | ||
| Short circuit detection | Yes | ||
| Cross-circuit detection | Yes | ||
| Series-wiring | Yes | ||
| Safety functions | Yes | ||
| Integral system diagnostics, status | Yes | ||
| Number of safety contacts | 2 | ||
| <table><tr><td>Safety classification</td></tr></table> | |||
| Standards | EN ISO 13849-1 IEC 62061 IEC 61508 |
||
| Safety classification – Interlocking function | |||
| Performance Level, up to | e | ||
| Category | 4 | ||
| PFH value | 1.90 x 10⁻⁹ /h | ||
| PFD value | 1.60 x 10⁻⁴ | ||
| Safety Integrity Level (SIL), suitable for applications in | 3 | ||
| Mission time | 20 Year(s) | ||
| Safety classification – Guard locking function | |||
| Performance Level, up to | d | ||
| Category | 2 | ||
| PFH value | 1.00 x 10⁻⁸ /h | ||
| PFD value | 8.90 x 10⁻⁴ | ||
| Safety Integrity Level (SIL), suitable for applications in | 2 | ||
| Mission time | 20 Year(s) | ||
Mechanical data |
|||
| Mechanical life, minimum | 1,000,000 Operations | ||
| Holding force in accordance with EN ISO 14119 Fzh | 2,000 N | ||
| Holding force, maximum Fmax | 2,600 N | ||
| Latching force | 30 N | ||
| Actuating speed, maximum | 0.2 m/s | ||
| Mechanical data – Connection technique | |||
| Type of connection | Screw terminals M20 x 1.5 | ||
| Cable section, minimum | 0.25 mm² | ||
| Cable section, maximum | 1.5 mm² | ||
| Note (Cable section) | All indications including the conductor ferrules. | ||
| Wire cross-section, minimum | 23 AWG | ||
| Wire cross-section, maximum | 15 AWG | ||
| Mechanical data – Dimensions | |||
| Length of sensor | 50 mm | ||
| Width of sensor | 40 mm | ||
| Height of sensor | 220 mm | ||
| Ambient conditions | |||
| Degree of protection | IP67 IP66 |
||
| Ambient temperature, minimum | -25 °C | ||
| Ambient temperature, maximum | +60 °C | ||
| Storage and transport temperature, minimum | -25 °C | ||
| Storage and transport temperature, maximum | +85 °C | ||
| Relative humidity, minimum | 30 % | ||
| Relative humidity, maximum | 95 % | ||
| Note (Relative humidity) | non-condensing | ||
| Resistance to vibration to EN 60068-2-6 | 10 … 150 Hz, amplitude 0.35 mm | ||
| Restistance to shock | 30 g / 11 ms | ||
| Protection class | III | ||
| Ambient conditions – Insulation values | |||
| Rated insulation voltage Ui | 32 VDC | ||
| Rated impulse withstand voltage Uimp | 0.8 kV | ||
| Overvoltage category | III | ||
| Degree of pollution to VDE 0100 | 3 | ||
| Electrical data | |||
| Operating voltage, minimum | 20.4 VDC | ||
| Operating voltage, maximum | 26.4 VDC | ||
| No-load supply current, maximum I0 | 50 mA | ||
| Current consumption with magnet ON, average | 200 mA | ||
| Current consumption with magnet ON, peak | 700 mA / 100 ms | ||
| Operating current | 1,200 mA | ||
| Switching frequency, approx. | 1 Hz | ||
Electrical data – Magnet control |
|||
| Switching thresholds | -3 V
… 5 V (Low) |
||
| Classification ZVEI CB24I, Sink | C0 | ||
| Classification ZVEI CB24I, Source | C1 C2 C3 |
||
| Electrical data – Safety digital inputs | |||
| Switching thresholds | −3 V … 5 V (Low) 15 V … 30 V (High) |
||
| Classification ZVEI CB24I, Sink | C1 | ||
| Classification ZVEI CB24I, Source | C1 C2 C3 |
||
| Electrical data – Safety digital outputs | |||
| Rated operating current (safety outputs) | 250 mA | ||
| Voltage drop Ud, maximum | 4 V | ||
| Leakage current Ir | 0.5 mA | ||
| Voltage, Utilisation category DC-13 | 24 VDC | ||
| Current, Utilisation category DC-13 | 0.25 A | ||
| Classification ZVEI CB24I, Source | C2 | ||
| Classification ZVEI CB24I, Sink | C1 C2 |
||
| Electrical data – Diagnostic outputs | |||
| Operating current | 50 mA | ||
| Voltage drop Ud, maximum | 4 V | ||
| Voltage, Utilisation category DC-13 | 24 VDC | ||
| Current, Utilisation category DC-13 | 0.05 A | ||
| Status indication | |||
| Note (LED switching conditions display) | Operating condition: LED green Error / functional defect: LED red Supply voltage UB: LED green |
||
| Scope of delivery | |||
| Scope of delivery | Actuators must be ordered separately. Triangular key for AZM 201 |
||
| Accessory | |||
| Recommendation (actuator) | AZ/AZM201-B1 AZ/AZM201-B30 |
||
| Note | |||
| Note (General) | As long as the actuating unit remains inserted in the solenoid interlock, the unlocked safety guard can be relocked. In this case, the safety outputs are re-enabled, so that the safety guard must not be opened. | ||
Đánh giá (0)
Đánh giá
Chưa có đánh giá nào.