AZM300B-I1-ST-1P2P-A SCHMERSAL HÃNG SCHMERSAL VIỆT NAM

AZM300B-I1-ST-1P2P-A SCHMERSAL HÃNG SCHMERSAL VIỆT NAM

CUNG CẤP HÀNG CHÍNH HÃNG SCHMERSAL VIỆT NAM : PITES VỆT NAM 

LH : 0916.597.556

“Mã hóa cá nhân với công nghệ RFID

Mức mã hóa “” Cao “” theo ISO 14119

Đầu nối M12, 8 cực

Nguồn để khóa

Bộ truyền động được giám sát

Kết quả chẩn đoán

Thiết kế hợp vệ sinh

Lớp bảo vệ IP 69

Thích hợp để gắn vào các hệ thống cấu hình “” Vỏ bọc bằng nhựa nhiệt dẻo

Công nghệ RFID để bảo vệ chống giả mạo dựa trên nhu cầu

3 hướng khác nhau của hành động

Thiết kế nhỏ gọn

3 đèn LED để hiển thị điều kiện hoạt động

Thích hợp cho bảo vệ bản lề và trượt

Hệ thống dây

Phát hành thủ công ”

Ordering data AZM300B-I1-ST-1P2P-A SCHMERSAL HÃNG SCHMERSAL VIỆT NAM
Product type description	AZM300B-I1-ST-1P2P-A
Article number (order number)	103001425
EAN (European Article Number)	4.03066E+12
eCl@ss number, version 9.0	27-27-26-03
eCl@ss number, version 11.0	27-27-26-03
eCl@ss number, version 12.0	27-27-26-03
ETIM number, version 7.0	EC002593
ETIM number, version 6.0	EC002593
Approvals – Standards
Certificates	TÜV cULus ECOLAB EAC FCC IC
General data
Standards	IEC 61508 IEC 60947-5-3 EN ISO 13849-1 EN ISO 14119
Coding	Individual coding
Coding level according to ISO 14119	High
Working principle	RFID
Frequency band RFID	125 kHz
Transmitter output, maximum	-6 dB/m
Enclosure material	Plastic, glass-fibre reinforced thermoplastic, self-extinguishing
Gross weight	550 g
Time to readiness, maximum	5,000 ms
Duration of risk, maximum	200 ms
Reaction time, switching off safety outputs via actuator, maximum	100 ms
Reaction time, switching off safety outputs via safety inputs, maximum	1.5 ms
General data – Features AZM300B-I1-ST-1P2P-A SCHMERSAL HÃNG SCHMERSAL VIỆT NAM
Power to lock	Yes
Actuator monitored	Yes
Latching	Yes
Manual release	Yes
Short circuit detection	Yes
Cross-circuit detection	Yes
Series-wiring	Yes
Safety functions	Yes
Integral system diagnostics, status	Yes
Number of fail-safe digital outputs	2
<table><tr><td>Safety classification</td></tr></table>
Standards	EN ISO 13849-1 IEC 61508
Safety classification – Interlocking function
Performance Level, up to	e
Category	4
PFH value	5.20 x 10⁻¹⁰ /h
PFD value	4.50 x 10⁻⁵
Safety Integrity Level (SIL), suitable for applications in	3
Mission time	20 Year(s)
Mechanical data
Mechanical life, minimum	1,000,000 Operations
Note (Mechanical life)	When using as door stop: ≥ 50.000 operations (door mass ≤ 5 kg and actuating speed ≤ 0.5 m/s)
Angular misalignment between solenoid interlock and actuator, maximum	2 °
Holding force in accordance with EN ISO 14119 Fzh	1,150 N
Holding force, maximum Fmax	1,500 N
Latching force, adjustable, position 1	25 N
Latching force, adjustable, position 2	50 N
Type of the fixing screws	2x M6
Tightening torque of the fixing screws, minimum	6 Nm
Tightening torque of the fixing screws, maximum	7 Nm
Mechanical data – Switching distances according EN IEC 60947-5-3
Switching distance	2 mm
Assured switching distance “ON” Sao	1 mm
Assured switching distance “OFF” Sar	20 mm
Mechanical data – Connection technique
Type of connection	Connector M12, 8-pole, A-coded
Length of sensor chain, maximum	200 m
Note (length of the sensor chain)	Cable length and cross-section change the voltage drop dependiing on the output current
Note (series-wiring)	Unlimited number of devices, oberserve external line fusing, max. 31 devices in case of serial diagnostic SD
Mechanical data – Dimensions
Length of sensor	120 mm
Width of sensor	87.5 mm
Height of sensor	35 mm
Ambient conditions
Degree of protection	IP67 IP69 IP66
Ambient temperature, minimum	+0 °C
Ambient temperature, maximum	+60 °C
Storage and transport temperature, minimum	-10 °C
Storage and transport temperature, maximum	+90 °C
Relative humidity, maximum	93 %
Note (Relative humidity)	non-condensing non-icing
Resistance to vibration to EN 60068-2-6	10 … 150 Hz, amplitude 0.35 mm
Restistance to shock	30 g / 11 ms
Protection class	III
Permissible installation altitude above sea level, maximum	2,000 m
Ambient conditions – Insulation values
Rated insulation voltage Ui	32 VDC
Rated impulse withstand voltage Uimp	0.8 kV
Overvoltage category	III
Degree of pollution to IEC/EN 60664-1	3
Electrical data AZM300B-I1-ST-1P2P-A SCHMERSAL HÃNG SCHMERSAL VIỆT NAM
Operating voltage, minimum	20.4 VDC
Operating voltage, maximum	26.4 VDC
Note (Power supply, general)	stabilised PELV power supply
No-load supply current, maximum I0	100 mA
Current consumption with magnet ON, average	200 mA
Current consumption with magnet ON, peak	350 mA / 200 ms
Required rated short-circuit current to EN 60947-5-1	100 A
External wire and device fuse rating	2 A gG
Switching frequency, maximum	0.5 Hz
Electrical data – Magnet control
Designation, Magnet control	IN
Switching thresholds	-3 V … 5 V (Low) 15 V … 30 V (High)
Current consumption at 24V	10 mA
Magnet switch-on time	100 %
Test pulse duration, maximum	5 ms
Test pulse interval, minimum	40 ms
Classification ZVEI CB24I, Sink	C0
Classification ZVEI CB24I, Source	C1 C2 C3
Electrical data – Safety digital inputs
Designation, Safety inputs	X1 and X2
Switching thresholds	−3 V … 5 V (Low) 15 V … 30 V (High)
Current consumption at 24V	5 mA
Test pulse duration, maximum	1 ms
Test pulse interval, minimum	100 ms
Classification ZVEI CB24I, Sink	C1
Classification ZVEI CB24I, Source	C2
Electrical data – Safety digital outputs
Designation, Safety outputs	Y1 and Y2
Design of switching elements	short-circuit proof, p-type
Voltage drop Ud, maximum	4 V
Leakage current Ir	0.5 mA
Voltage, Utilisation category DC-12	24 VDC
Current, Utilisation category DC-12	0.25 A
Voltage, Utilisation category DC-13	24 VDC
Current, Utilisation category DC-13	0.25 A
Test pulse duration, maximum	0.5 ms
Test pulse interval, typical	1000 ms
Classification ZVEI CB24I, Source	C2
Classification ZVEI CB24I, Sink	C1 C2
Electrical data – Diagnostic outputs
Designation, Diagnostic outputs	OUT
Design of switching elements	short-circuit proof, p-type
Voltage drop Ud, maximum	4 V
Voltage, Utilisation category DC-12	24 VDC
Current, Utilisation category DC-12	0.05 A
Voltage, Utilisation category DC-13	24 VDC
Current, Utilisation category DC-13	0.05 A
Status indication
Note (LED switching conditions display)	Operating condition: LED green Error / functional defect: LED red Supply voltage UB: LED green
Pin assignment
PIN 1	A1 Supply voltage UB
PIN 2	X1 Safety input 1
PIN 3	A2 GND
PIN 4	Y1 Safety output 1
PIN 5	OUT Diagnostic output
PIN 6	X2 Safety input 2
PIN 7	Y2 Safety output 2
PIN 8	IN Solenoid control
Scope of delivery
Scope of delivery	Actuators must be ordered separately.
Accessory
Recommendation (actuator)	AZ/AZM300-B1
Note
Note (General)	For doors that are flush with the door frame, the optional mounting plate MP-AZ/AZM300-1 can be used. For glass and Makrolon doors, the optional mounting kit MS-AZ/AZM300-B1-1 can be used. As long as the actuating unit remains inserted in the solenoid interlock, the unlocked safety guard can be relocked. In this case, the safety outputs are re-enabled, so that the safety guard must not be opened.

 

XEM THÊM SẢN PHẨM : http://pilz-vietnam.com/