AZM300B-I2-ST-1P2P-A SCHMERSAL HÃNG SCHMERSAL VIỆT NAM
CUNG CẤP HÀNG CHÍNH HÃNG SCHMERSAL VIỆT NAM : PITES VỆT NAM
LH : 0916.597.556
Mô tả
AZM300B-I2-ST-1P2P-A SCHMERSAL HÃNG SCHMERSAL VIỆT NAM
CUNG CẤP HÀNG CHÍNH HÃNG SCHMERSAL VIỆT NAM : PITES VỆT NAM
LH : 0916.597.556
“Mã hóa cá nhân lặp đi lặp lại với công nghệ RFID
Mức mã hóa “” Cao “” theo ISO 14119Đầu nối M12, 8 cựcNguồn để khóa
Bộ truyền động được giám sátKết quả chẩn đoán
Thiết kế hợp vệ sinh
Lớp bảo vệ IP 69Thích hợp để gắn vào các hệ thống cấu hình
“” Vỏ bọc bằng nhựa nhiệt dẻoCông nghệ RFID để bảo vệ chống giả mạo dựa trên nhu cầu 3 hướng khác nhau của hành động
Thiết kế nhỏ gọn3 đèn LED để hiển thị điều kiện hoạt độngThích hợp cho bảo vệ bản lề và trượtHệ thống dâyPhát hành thủ công ”
Ordering data AZM300B-I2-ST-1P2P-A SCHMERSAL HÃNG SCHMERSAL VIỆT NAM |
|
| Product type description | AZM300B-I2-ST-1P2P-A |
| Article number (order number) | 103001427 |
| EAN (European Article Number) | 4.03066E+12 |
| eCl@ss number, version 9.0 | 27-27-26-03 |
| eCl@ss number, version 11.0 | 27-27-26-03 |
| eCl@ss number, version 12.0 | 27-27-26-03 |
| ETIM number, version 7.0 | EC002593 |
| ETIM number, version 6.0 | EC002593 |
| Approvals – Standards | |
| Certificates | TÜV cULus ECOLAB EAC FCC IC |
General data AZM300B-I2-ST-1P2P-A SCHMERSAL HÃNG SCHMERSAL VIỆT NAM |
|
| Standards | IEC 61508 IEC 60947-5-3 EN ISO 13849-1 EN ISO 14119 |
| Coding | Individual coding, multiple teaching |
| Coding level according to ISO 14119 | High |
| Working principle | RFID |
| Frequency band RFID | 125 kHz |
| Transmitter output, maximum | -6 dB/m |
| Enclosure material | Plastic, glass-fibre reinforced thermoplastic, self-extinguishing |
| Gross weight | 550 g |
| Time to readiness, maximum | 5,000 ms |
| Duration of risk, maximum | 200 ms |
| Reaction time, switching off safety outputs via actuator, maximum | 100 ms |
| Reaction time, switching off safety outputs via safety inputs, maximum | 1.5 ms |
| General data – Features | |
| Power to lock | Yes |
| Actuator monitored | Yes |
| Latching | Yes |
| Manual release | Yes |
| Short circuit detection | Yes |
| Cross-circuit detection | Yes |
| Series-wiring | Yes |
| Safety functions | Yes |
| Integral system diagnostics, status | Yes |
| Number of fail-safe digital outputs | 2 |
| <table><tr><td>Safety classification</td></tr></table> | |
StandardsAZM300B-I2-ST-1P2P-A SCHMERSAL HÃNG SCHMERSAL VIỆT NAM |
EN ISO 13849-1 IEC 61508 |
| Safety classification – Interlocking function | |
| Performance Level, up to | e |
| Category | 4 |
| PFH value | 5.20 x 10⁻¹⁰ /h |
| PFD value | 4.50 x 10⁻⁵ |
| Safety Integrity Level (SIL), suitable for applications in | 3 |
| Mission time | 20 Year(s) |
| Mechanical data | |
| Mechanical life, minimum | 1,000,000 Operations |
| Note (Mechanical life) | When using as door stop: ≥ 50.000 operations (door mass ≤ 5 kg and actuating speed ≤ 0.5 m/s) |
| Angular misalignment between solenoid interlock and actuator, maximum | 2 ° |
| Holding force in accordance with EN ISO 14119 Fzh | 1,150 N |
| Holding force, maximum Fmax | 1,500 N |
| Latching force, adjustable, position 1 | 25 N |
| Latching force, adjustable, position 2 | 50 N |
| Type of the fixing screws | 2x M6 |
| Tightening torque of the fixing screws, minimum | 6 Nm |
| Tightening torque of the fixing screws, maximum | 7 Nm |
| Mechanical data – Switching distances according EN IEC 60947-5-3 | |
| Switching distance | 2 mm |
| Assured switching distance “ON” Sao | 1 mm |
| Assured switching distance “OFF” Sar | 20 mm |
Mechanical data – Connection technique |
|
| Type of connection | Connector M12, 8-pole, A-coded |
| Length of sensor chain, maximum | 200 m |
| Note (length of the sensor chain) | Cable length and cross-section change the voltage drop dependiing on the output current |
| Note (series-wiring) | Unlimited number of devices, oberserve external line fusing, max. 31 devices in case of serial diagnostic SD |
| Mechanical data – Dimensions | |
| Length of sensor | 120 mm |
| Width of sensor | 87.5 mm |
| Height of sensor | 35 mm |
| Ambient conditions | |
| Degree of protection | IP67 IP69 IP66 |
| Ambient temperature, minimum | +0 °C |
| Ambient temperature, maximum | +60 °C |
| Storage and transport temperature, minimum | -10 °C |
| Storage and transport temperature, maximum | +90 °C |
| Relative humidity, maximum | 93 % |
| Note (Relative humidity) | non-condensing non-icing |
| Resistance to vibration to EN 60068-2-6 | 10 … 150 Hz, amplitude 0.35 mm |
| Restistance to shock | 30 g / 11 ms |
| Protection class | III |
| Permissible installation altitude above sea level, maximum | 2,000 m |
| Ambient conditions – Insulation values | |
| Rated insulation voltage Ui | 32 VDC |
| Rated impulse withstand voltage Uimp | 0.8 kV |
| Overvoltage category | III |
| Degree of pollution to IEC/EN 60664-1 | 3 |
Electrical data |
|
| Operating voltage, minimum | 20.4 VDC |
| Operating voltage, maximum | 26.4 VDC |
| Note (Power supply, general) | stabilised PELV power supply |
| No-load supply current, maximum I0 | 100 mA |
| Current consumption with magnet ON, average | 200 mA |
| Current consumption with magnet ON, peak | 350 mA / 200 ms |
| Required rated short-circuit current to EN 60947-5-1 | 100 A |
| External wire and device fuse rating | 2 A gG |
| Switching frequency, maximum | 0.5 Hz |
| Electrical data – Magnet control | |
| Designation, Magnet control | IN |
| Switching thresholds | -3 V … 5 V (Low) 15 V … 30 V (High) |
| Current consumption at 24V | 10 mA |
| Magnet switch-on time | 100 % |
| Test pulse duration, maximum | 5 ms |
| Test pulse interval, minimum | 40 ms |
| Classification ZVEI CB24I, Sink | C0 |
| Classification ZVEI CB24I, Source | C1 C2 C3 |
| Electrical data – Safety digital inputs | |
| Designation, Safety inputs | X1 and X2 |
| Switching thresholds | −3 V … 5 V (Low) 15 V … 30 V (High) |
| Current consumption at 24V | 5 mA |
| Test pulse duration, maximum | 1 ms |
| Test pulse interval, minimum | 100 ms |
| Classification ZVEI CB24I, Sink | C1 |
Classification ZVEI CB24I, Source |
C1 C2 C3 |
| Electrical data – Safety digital outputs | |
| Designation, Safety outputs | Y1 and Y2 |
| Design of switching elements | short-circuit proof, p-type |
| Voltage drop Ud, maximum | 4 V |
| Leakage current Ir | 0.5 mA |
| Voltage, Utilisation category DC-12 | 24 VDC |
| Current, Utilisation category DC-12 | 0.25 A |
| Voltage, Utilisation category DC-13 | 24 VDC |
| Current, Utilisation category DC-13 | 0.25 A |
| Test pulse duration, maximum | 0.5 ms |
| Test pulse interval, typical | 1000 ms |
| Classification ZVEI CB24I, Source | C2 |
| Classification ZVEI CB24I, Sink | C1 C2 |
| Electrical data – Diagnostic outputs | |
| Designation, Diagnostic outputs | OUT |
| Design of switching elements | short-circuit proof, p-type |
| Voltage drop Ud, maximum | 4 V |
| Voltage, Utilisation category DC-12 | 24 VDC |
| Current, Utilisation category DC-12 | 0.05 A |
| Voltage, Utilisation category DC-13 | 24 VDC |
| Current, Utilisation category DC-13 | 0.05 A |
Status indication |
|
| Note (LED switching conditions display) | Operating condition: LED green Error / functional defect: LED red Supply voltage UB: LED green |
| Pin assignment | |
| PIN 1 | A1 Supply voltage UB |
| PIN 2 | X1 Safety input 1 |
| PIN 3 | A2 GND |
| PIN 4 | Y1 Safety output 1 |
| PIN 5 | OUT Diagnostic output |
| PIN 6 | X2 Safety input 2 |
| PIN 7 | Y2 Safety output 2 |
| PIN 8 | IN Solenoid control |
| Scope of delivery | |
| Scope of delivery | Actuators must be ordered separately. |
| Accessory | |
| Recommendation (actuator) | AZ/AZM300-B1 |
| Note | |
| Note (General) | For doors that are flush with the door frame, the optional mounting plate MP-AZ/AZM300-1 can be used. For glass and Makrolon doors, the optional mounting kit MS-AZ/AZM300-B1-1 can be used. As long as the actuating unit remains inserted in the solenoid interlock, the unlocked safety guard can be relocked. In this case, the safety outputs are re-enabled, so that the safety guard must not be opened. |
xem thêm sản phẩm : http://pilz-vietnam.com/
Đánh giá (0)
Hãy là người đầu tiên nhận xét “AZM300B-I2-ST-1P2P-A SCHMERSAL HÃNG SCHMERSAL VIỆT NAM”
Sản phẩm tương tự
AES 1112.2 SCHMERSAL HÃNG SCHMERSAL VIỆT NAM
308023/303313 KNF , BƠM KNF , ĐẠI LÝ CHÍNH THỨC KNF TẠI VIỆT NAM
Allen-Bradley 1492-SPM3C400 Bulletin
Đánh giá
Chưa có đánh giá nào.