G1061-3 Wedge grip, 1″ jaw width, rubber jaw faces, 1/2-20F

G1061-3 Wedge grip 1″ jaw width rubber jaw faces 1/2-20F

Heavy-duty grips designed for a range of tensile testing requirements up to 2,000 lbF [10 kN]. Self-tightening
stainless steel serrated or rubber jaw faces engage the sample through a spring loaded knob and rack and pinion
type mechanism. The jaws ride on rollers, eliminating jamming common in conventional wedge grips* Includes jam nuts

Fully enclosed, air-powered grip for seal strength
testing of packaging, elongation testing of various
materials, and other tensile testing requirements.
Serrated interlocking jaws effectively grip samples
for up to 100 lbF of force. The grip features a
unique integrated open/close valve for quick
sample engagement and disengagement. An air
connection kit, consisting of tubing and fittings
needed to connect two grips, is available separately.
A membrane repair kit is also available. See below.

G1061-3 Wedge grip 1″ jaw width rubber jaw faces 1/2-20F

G1061-1 G1061 G1061-2 G1061-3
Model No. A B C D E F G
G1061-1
1.95
[49.5] 2.45
[62.2] 0.375
[9.5] 0.95
[24.1] 5/16-18
UNC
0 – 0.25
[0 – 6.4] 0.62
[15.7] G1061 0.75
[19.1] 1.50
[38.1] 5/16-18
UNC
1.00
[25.4] G1061-2
1.00
[25.4] 1.75
[44.5] 1/2-20
UNF
1.13
[28.7] G1061-3 0 – 0.20
[0 – 5.1] Model
No.
Capacity
lbF [N] Weight
lb [kg] Jaw Material /
Hardness
Included
Adapters
G1061-1 200
[900] 0.50
[0.23] 416 SS / 55 RC
5/16-18M to #10-32F,
#10-32 M/M stud*,
5/16-18 M/M stud* G1061 1200
[5,300] 0.80
[0.36] G1061-2 2,000
[9,000] 0.90
[0.41] 1/2-20M to 5/16-18F,
1/2-20 M/M stud*,
5/16-18 stud* G1061-3 50
[250] Neoprene rubber
Durometer = 70
Miniature wedge grip
For general low force pull testing applications. The serrated, self tightening steel jaws are easily opened with a
spring-loaded lever.
Model No. Capacity
lbF [N] Weight
lb [kg] G1062 100 [500] 0.08 [0.04] A B C D E F G
1.37
[34.8] 2.49
[63.1] 0.19
[4.8] 0.32
[8.1] #10-32
UNF
0 – 0.09
[0 – 2.3] 0.15
[3.9] Includes a #10-32 M/M stud with jam nuts

Data Sheet

Mark-10 Corporation n www.mark-10.com n info@mark-10.com
Toll-free: 888-MARK-TEN n Tel: 631-842-9200 n Fax: 631-842-9201
Specifications subject to change without prior notice
Grips & Attachments 32-1060 REV 1220 Page 2 of 21
Miniature component grip
For testing small and hard-to-reach electronic and
mechanical components. Slender profile allows this
grip to be used in a wide range of applications.
Model
No.
Capacity
lbF [N] Weight
lb [kg] A B C D E
G1003 30
[150] 0.05
[0.02] 0.5
[12.7] 1.7
[43.2] 0.5
[12.7] 0 – 0.07
[0 – 1.8] 0.15
[3.8] Includes a #10-32 M/M stud with jam nuts
Multi-jaw grip
For gripping round or odd shaped items. Jaws
expand and retract by rotating the housing.
Model
No.
Cap.
lbF [N] Weight
lb [kg] ØA B C ØD E ØF
G1056 100
[500] 0.30
[0.14] 3.50
[88.9] 2.30
[58.4] MAX
1.63
[41.4] 1.55
[39.4] 0.075
[1.91] 0.40 – 1.25
[10.2 – 31.7] Includes a #10-32 M/M stud with jam nuts
Clevis grip
This grip is designed for ergonomic assessment,
spring testing, and other pull testing applications.
Model
No.
Capacity
lbF [N] Weight
lb [kg] A B C D E ØF
G1077 500
[2,500] 0.29
[0.13] 1.70
[43.2] 1.25
[31.8] 0.38
[9.7] 0.85
[21.6] 1.45
[36.8] 0.25
[6.3] Includes a 5/16-18M to #10-32F thread adapter, 5/16-18 M/M stud with jam nuts, and
#10-32 M/M stud with jam nuts
Data Sheet
Mark-10 Corporation n www.mark-10.com n info@mark-10.com
Toll-free: 888-MARK-TEN n Tel: 631-842-9200 n Fax: 631-842-9201
Specifications subject to change without prior notice
High capacity clevis grip
This high capacity grip is designed for spring testing
and pulling testing applications. Integrated eye end.
Model No. Capacity
lbF [kN] Weight
lb [kg] G1090 2,000 [9] 0.78 [0.35] A B C ØD E F ØG ØH ØI
2.77
[70.4] 1.80
[45.7] 0.55
[14.0] 1.40
[35.6] 2.32
[58.9] 0.87
[22.1] 0.63
[15.9] 0.32
[8.0] 0.38
[9.7] 32-1060 REV 1220 Page 3 of 21
Ribbon wrap grip
Secures textile webbing, tape, and braided materials typically used in construction, shipping, and other
industrial uses. Integrated eye end.
Model No. Capacity
lbF [kN] Weight
lb [kg] G1111 2,000 [10] 5.2 [2.4] Ø1.18 [Ø30.0] 3.15 [80.0] 6.22 [158.0]

xem thêm sản phẩm https://automation.pitesvietnam.com/

http://flowmeters-vietnam.com/