SA5000 IFM CẢM BIẾN LƯU LƯỢNG SA5000 HÃNG IFM VIỆT NAM

SA5000 IFM CẢM BIẾN LƯU LƯỢNG SA5000 HÃNG IFM VIỆT NAM

CUNG CẤP HÀNG CHÍNH HÃNG  : PITES VIỆT NAM 

LH : 0916.597.556 ( Mr Tú ) 

Đo lưu lượng và nhiệt độ cùng một lúc

Tối ưu hóa cho nước, dầu và không khí

Màn hình màu đỏ / xanh lá cây để xác định rõ ràng phạm vi chấp nhận được

Với đầu ra chuyển mạch, tín hiệu tương tự và IO-Link

Kết nối quy trình có thể được xoay để có sự liên kết tối ưu

Product characteristics SA5000 IFM CẢM BIẾN LƯU LƯỢNG SA5000 HÃNG IFM VIỆT NAM
Number of inputs and outputs	Number of digital outputs: 2; Number of analogue outputs: 1
Process connection	threaded connection M18 x 1,5 internal thread
Application
Special feature	Gold-plated contacts
Media	water; glycol solutions; air; oils
Note on media	low-viscosity oils with viscosity: ≤ 40 mm²/s (40 °C) high-viscosity oils with viscosity: > 40 mm²/s (40 °C)
Medium temperature [°C]	-20…90
Pressure rating [bar]	100
Pressure rating [Mpa]	10
MAWP (for applications according to CRN) [bar]	100
Electrical data
Operating voltage [V]	18…30 DC
Current consumption [mA]	< 100
Protection class	III
Reverse polarity protection	yes
Power-on delay time [s]	10
Inputs / outputs
Number of inputs and outputs	Number of digital outputs: 2; Number of analogue outputs: 1
Outputs
Total number of outputs	2
Output signal	switching signal; analogue signal; frequency signal; IO-Link; (configurable)
Electrical design	PNP/NPN
Number of digital outputs	2
Output function	normally open / normally closed; (parameterisable)
Max. voltage drop switching output DC [V]	2.5
Permanent current rating of switching output DC [mA]	250
Number of analogue outputs	1
Analogue current output [mA]	4…20; (scalable)
Max. load [Ω]	350
Short-circuit protection	yes
Type of short-circuit protection	pulsed
Overload protection	yes
Frequency of the output [Hz]	0…1000
Measuring/setting range
Probe length L [mm]	45
Operating mode	relative; absolutely liquid; absolutely gaseous; (absolute: reference measurement recommended)
Note on factory setting	Operating mode: relative
Temperature monitoring
Measuring range [°C]	-20…90
Resolution [°C]	0.2
Liquid media – absolute operating mode
Setting range [m/s]	0.04…3
Greatest sensitivity [m/s]	0.04…3
Liquid media – relative operating mode
Setting range [m/s]	0.04…6
Greatest sensitivity [m/s]	0.04…3
Gases – operating mode “absolute”
Setting range [m/s]	0…100
Greatest sensitivity [m/s]	30…100
Gases – operating mode “relative”
Setting range [m/s]	0…200
Greatest sensitivity [m/s]	30…100
Accuracy / deviations
Temperature drift [cm/s x 1/K]	0,003 m/s x 1/K (< 20 °C; > 70 °C)
Temperature gradient [K/min]	100
Absolute operating mode
Repeatability	0,05 m/s; (water; flow velocity: 0,05…3 m/s)
Relative operating mode
Accuracy	± (7 % MW + 2 % MEW); (for relative mode in the range of maximum sensitivity under the following conditions:; water: 20…70 °C; inlet length: 1.5 m; DN25 (DIN 2448); mounting position according to instructions; Accuracy can differ for other media and mounting positions.)
Repeatability	0,05 m/s; (water; flow velocity: 0,05…3 m/s)
Temperature monitoring
Temperature drift	± 0,005 K/°C
Accuracy [K]	± 0,3 / ± 1; (water; flow velocity: 0,3…3 m/s / air; flow velocity: > 10 m/s)
Response times
Response time [s]	0.5; (T09; water; glycol: 0,8 s; air: 7 s; oil: 1,8 s; each T09)
Temperature monitoring
Dynamic response T05 / T09 [s]	1,5 (T09); (water; flow velocity: 0,3…3 m/s)
Software / programming
Parameter setting options	hysteresis / window; normally open / normally closed; switching logic; current/frequency output; medium selection; Damping; Teach function; display can be rotated and switched off; standard unit of measurement; process value colour
Interfaces
Communication interface	IO-Link
Transmission type	COM2 (38,4 kBaud)
IO-Link revision	1.1
SDCI standard	IEC 61131-9
Profiles	Smart Sensor: Process Data Variable; Device Identification, Device Diagnosis
SIO mode	yes
Required master port type	A
Process data analogue	2
Process data binary	2
Min. process cycle time [ms]	3
Supported DeviceIDs	Type of operation DeviceID Factory setting / ModE = (REL) 533 ModE = (LIQU) 540 ModE = (GAS) 547
Operating conditions
Ambient temperature [°C]	-40…80
Storage temperature [°C]	-40…100
Protection	IP 65; IP 67
Tests / approvals
EMC	DIN EN 60947-5-9
Shock resistance	DIN EN 60068-2-27 50 g (11 ms)
Vibration resistance	DIN EN 60068-2-6 20 g (10…2000 Hz)
MTTF [years]	132
UL approval	UL Approval no. I003
Mechanical data
Weight [g]	314
Materials	stainless steel (1.4404 / 316L); stainless steel (1.4310 / 301); PBT-GF20; PBT-GF30
Materials (wetted parts)	stainless steel (1.4404 / 316L); Gasket: FKM
Process connection	threaded connection M18 x 1,5 internal thread
Displays / operating elements
Display	Display unit 6 x LED, green (%, m/s, l/min, m³/h, °C, 10³) switching status 2 x LED, yellow measured values alphanumeric display, red/green 4-digit
Remarks
Remarks	MW = measured value MEW = Final value of the measuring range
Pack quantity	1 pcs.
Electrical connection
Connection	Connector: 1 x M12; Contacts: gold-plated
ifm electronic gmbh • Friedrichstraße 1 • 45128 Essen — We reserve the right to make technical alterations without prior notice. — EN-GB — SA5000-01 — 26.04.2021 —

XEM THÊM SẢN PHẨM :

O1D100 IFM

SA4110 IFM 

SA5000 IFM

SM8120 IFM đồng hồ đo lưu lượng