Mô tả
General Specifications
Attribute Value
Dimensions, HxWxD 90 x 40.4 x 87 mm (3.54 x 1.59 x 3.43 in.)
Height including mounting tabs is 110 mm (4.33 in)
Approximate Shipping Weight
(with carton)
240g (0.53 lbs.)
Bus Current Draw (max.) 40 mA @ 5V DC
105 mA @ 24V DC
Analog Normal Operating Range Voltage: 0…10V DC
Current: 4…20 mA
Full Scale(1) Analog Ranges
(1) The over- or under-range flag comes on when the normal operating range (over/under) is exceeded. The module continues to
convert the analog input up to the maximum full scale range.
Voltage: 0…10.5V DC
Current: 0…21 mA
Resolution 12 bits (unipolar)
Repeatability (2)
(2) Repeatability is the ability of the input module to register the same reading in successive measurements for the same input
signal.
±0.12%
Input and Output Group to System
Isolation 30V AC/30V DC rated working voltage (3)
(IEC Class 2 reinforced insulation)
type test: 500V AC or 707V DC for 1 minute
(3) Rated working voltage is the maximum continuous voltage that can be applied at the terminals with respect to earth
ground.
Module Power LED On: indicates power is applied.
Vendor ID Code 1
Product Type Code 10
Product Code 75
Recommended Cable Belden 8761 (shielded)
Wire size See Wire Size and Terminal Screw Torque on page 16
Wiring category (4)
(4) Use this Conductor Category information for planning conductor routing. Refer to Industrial Automation Wiring and
Grounding Guidelines, publication 1770-4.1.
2 – on signal ports
(3) Vcm = 0 (includes offset, gain, non-linearity and repeatability error terms)
±0.55% full scale at -20…65 °C (-4 °F…149 °F)
±0.3% full scale at 25 °C (77 °F)
Input Impedance Voltage Terminal: 200KΩ
Current Terminal: 250Ω
Current Input Protection ±32 mA
Voltage Input Protection ±30 V
Channel Diagnostics Over or under range or open circuit condition by bit reporting for analog inputs.
IEC 60068-2-2 (Test Bb, Unpackaged Non-operating Dry Heat),
IEC 60068-2-14 (Test Na, Unpackaged Non-operating Thermal Shock):
-40…85 °C (-40…185 °F)
1762-IF2OF2 Allen Bradley Pitesco Việt Nam Specifications
General Specifications
Attribute Value
Dimensions, HxWxD 90 x 40.4 x 87 mm (3.54 x 1.59 x 3.43 in.)
Height including mounting tabs is 110 mm (4.33 in)
Approximate Shipping Weight
(with carton)
240g (0.53 lbs.)
Bus Current Draw (max.) 40 mA @ 5V DC
105 mA @ 24V DC
Analog Normal Operating Range Voltage: 0…10V DC
Current: 4…20 mA
Full Scale(1) Analog Ranges
(1) The over- or under-range flag comes on when the normal operating range (over/under) is exceeded. The module continues to
convert the analog input up to the maximum full scale range.
Voltage: 0…10.5V DC
Current: 0…21 mA
Resolution 12 bits (unipolar)
Repeatability (2)
(2) Repeatability is the ability of the input module to register the same reading in successive measurements for the same input
signal.
±0.12%
Input and Output Group to System
Isolation 30V AC/30V DC rated working voltage (3)
(IEC Class 2 reinforced insulation)
type test: 500V AC or 707V DC for 1 minute
(3) Rated working voltage is the maximum continuous voltage that can be applied at the terminals with respect to earth
ground.
Module Power LED On: indicates power is applied.
1762-IF2OF2 Allen Bradley
Vendor ID Code 1
Product Type Code 10
Product Code 75
Recommended Cable Belden 8761 (shielded)
Wire size See Wire Size and Terminal Screw Torque on page 16
Wiring category (4)
(4) Use this Conductor Category information for planning conductor routing. Refer to Industrial Automation Wiring and
Grounding Guidelines, publication 1770-4.1.
2 – on signal ports
22 MicroLogix 1762-IF2OF2 Analog Input/Output Module
Publication 1762-IN005C-EN-P – July 2013
Input Specifications
Attribute Value
Number of Inputs 2 differential (unipolar)
A/D Converter Type Successive approximation
Common Mode Voltage
Range(1)
(1) For proper operation, both the plus and minus input terminals must be within ±27V of analog common.
±27 V
Common Mode Rejection (2)
(2) Vcm = 1 V pk-pk AC
> 55 dB @ 50 and 60 Hz
Non-linearity (in percent
full scale)
±0.12%
Publication 1762-IN005C-EN-P – July 2013
Input Specifications
Attribute Value
Number of Inputs 2 differential (unipolar)
A/D Converter Type Successive approximation
Common Mode Voltage
Range(1)
(1) For proper operation, both the plus and minus input terminals must be within ±27V of analog common.
±27 V
Common Mode Rejection (2)
(2) Vcm = 1 V pk-pk AC
> 55 dB @ 50 and 60 Hz
Non-linearity (in percent
full scale)
±0.12%
Typical Overall Accuracy(3)
(3) Vcm = 0 (includes offset, gain, non-linearity and repeatability error terms)
±0.55% full scale at -20…65 °C (-4 °F…149 °F)
±0.3% full scale at 25 °C (77 °F)
Input Impedance Voltage Terminal: 200KΩ
Current Terminal: 250Ω
Current Input Protection ±32 mA
Voltage Input Protection ±30 V
Channel Diagnostics Over or under range or open circuit condition by bit reporting for analog inputs.
MicroLogix 1762-IF2OF2 Analog Input/Output Module 23
Publication 1762-IN005C-EN-P – July 2013
Output Specifications
Attribute Value
Number of Outputs 2 single-ended (unipolar)
D/A Converter Type Resistor string
Resistive Load on Current Output 0…500 Ω (includes wire resistance)
Load Range on Voltage Output > 1KΩ
Reactive Load, Current Output < 0.1 mH
Reactive Load, Voltage Output < 1 μF
Typical Overall Accuracy(1)
(1) Includes offset, gain, non-linearity and repeatability error terms.
± 1.17% full scale @ -20…65 °C (-4 °F…149 °F)
±0.5% full scale @ 25 °C (77 °F)
Output Ripple range 0…500 Hz
(referred to output range)
< ±0.1%
Non-linearity (in percent full scale) < ±0.59%
Open and Short-Circuit Protection Continuous
Output Protection ±32 mA
Publication 1762-IN005C-EN-P – July 2013
Output Specifications
Attribute Value
Number of Outputs 2 single-ended (unipolar)
D/A Converter Type Resistor string
Resistive Load on Current Output 0…500 Ω (includes wire resistance)
Load Range on Voltage Output > 1KΩ
Reactive Load, Current Output < 0.1 mH
Reactive Load, Voltage Output < 1 μF
Typical Overall Accuracy(1)
(1) Includes offset, gain, non-linearity and repeatability error terms.
± 1.17% full scale @ -20…65 °C (-4 °F…149 °F)
±0.5% full scale @ 25 °C (77 °F)
Output Ripple range 0…500 Hz
(referred to output range)
< ±0.1%
Non-linearity (in percent full scale) < ±0.59%
Open and Short-Circuit Protection Continuous
Output Protection ±32 mA
24 MicroLogix 1762-IF2OF2 Analog Input/Output Module
Publication 1762-IN005C-EN-P – July 2013
Environmental Specifications
Attribute Value
Temperature, operating IEC 60068-2-1 (Test Ad, Operating Cold),
IEC 60068-2-2 (Test Bd, Operating Dry Heat),
IEC 60068-2-14 (Test Nb, Operating Thermal Shock):
-20… 65 °C (-4…149 °F)
Temperature, storage IEC 60068-2-1 (Test Ab, Unpackaged Non-operating Cold),
Publication 1762-IN005C-EN-P – July 2013
Environmental Specifications
Attribute Value
Temperature, operating IEC 60068-2-1 (Test Ad, Operating Cold),
IEC 60068-2-2 (Test Bd, Operating Dry Heat),
IEC 60068-2-14 (Test Nb, Operating Thermal Shock):
-20… 65 °C (-4…149 °F)
Temperature, storage IEC 60068-2-1 (Test Ab, Unpackaged Non-operating Cold),
IEC 60068-2-2 (Test Bb, Unpackaged Non-operating Dry Heat),
IEC 60068-2-14 (Test Na, Unpackaged Non-operating Thermal Shock):
-40…85 °C (-40…185 °F)
Relative humidity IEC 60068-2-30 (Test Db, Unpackaged Damp Heat):5…95% non-condensing
Vibration IEC 60068-2-6 (Test Fc, Operating):
5 g @ 10… 500 Hz
Altitude, operating, max 2000 m (6562 ft)
Shock, operating IEC 60068-2-27 (Test Ea, Unpackaged Shock):
30 g
Shock, nonoperating IEC 60068-2-27 (Test Ea, Unpackaged Shock):
Panel mount – 50 g
DIN mount – 40 g
Emissions CISPR 11
Group 1, Class A
ESD immunity IEC 61000-4-2:
4 kV contact discharges
8 kV air discharges
4 kV indirect
Radiated RF immunity IEC 61000-4-3:
10V/m with 1 kHz sine-wave 80% AM from 80…2700 MHz
EFT/B immunity IEC 61000-4-4:
±2 kV @ 5 kHz on signal ports
Surge transient immunity IEC 61000-4-5:
±1 kV shielded line-earth (CM) on signal ports
Conducted RF immunity IEC 61000-4-6:
10V rms with 1 kHz sine-wave 80% AM from 150 kHz…80 MHz
xem thêm sản phẩm : https://automation.pitesvietnam.com/
Đánh giá (0)
Hãy là người đầu tiên nhận xét “1762-IF2OF2 Allen Bradley”
Sản phẩm tương tự
1762-IF2OF2 Allen Bradley
OPTIMASS 1400 C, CẢM BIẾN ĐO LƯU LƯỢNG OPTIMASS 1400 C, KROHNE VIỆT NAM
Đánh giá
Chưa có đánh giá nào.