PROTECT-IE-11-SK SHMERSAL HÃNG SCHMERSAL VIỆT NAM
CUP CẤP HÀNG CHÍNH HÃNG SCHMERSAL : PITES VIỆT NAM
LH: 0916.597.556
Mô tả
PROTECT-IE-11-SK SHMERSAL HÃNG SCHMERSAL VIỆT NAM
CUP CẤP HÀNG CHÍNH HÃNG SCHMERSAL : PITES VIỆT NAM
LH: 0916.597.556
Đầu vào cho tối đa 4 cảm biến trên mỗi giao diện, ví dụ: công tắc an toàn từ tính loại BNS, thiết bị dừng khẩn cấp, thiết bị khóa liên động và các loại khác 2 điểm tiếp xúc an toàn
| Input for up to 4 sensors per interface e.g.: magnetic safety switches type BNS, emergency stop devices, interlocking devices and others 2 safety contacts |
||
Ordering data |
||
| Product type description | PROTECT-IE-11-SK | |
| Article number (order number) | 101189095 | |
| EAN (European Article Number) | 4.25012E+12 | |
| eCl@ss number, version 9.0 | 27-37-18-19 | |
| eCl@ss number, version 11.0 | 27-37-18-19 | |
| eCl@ss number, version 12.0 | 27-37-18-19 | |
| ETIM number, version 7.0 | EC001449 | |
| ETIM number, version 6.0 | EC001449 | |
| Available until | 31.12.2022 | |
| Approvals – Standards | ||
| Certificates | cULus EAC |
|
| General data | ||
| Standards | IEC 61508 IEC/EN 60204-1 EN 60947-5-1 EN ISO 13849-1 |
|
| Climatic stress | EN 60068-2-78 | |
| Enclosure material | Glass-fibre reinforced thermoplastic, ventilated | |
| Gross weight | 140 g | |
| General data – Features | ||
| Stop-Category | 0 | |
| Electronic Fuse | Yes | |
| Wire breakage detection | Yes | |
| Cross-circuit detection | Yes | |
| Removable Terminals | Yes | |
| Automatic reset function | Yes | |
| Earth connection detection | Yes | |
| Integral system diagnostics, general | Yes | |
| Number of auxiliary contacts | 1 | |
| Number of LEDs | 5 | |
| Number of normally closed (NC) | 1 | |
| Number of normally open (NO) | 1 | |
| Number of safety contacts | 2 | |
| <table><tr><td>Safety classification</td></tr></table> | ||
| Standards | EN 60947-5-1 IEC 61508 |
|
| <table><tr><td>Safety classification – Relay outputs</td></tr></table> | ||
| Performance Level, up to | d | |
| Category to EN13849 | 3 | |
| Diagnostic Coverage (DC) Level | 60 % | |
| PFH value | 2.00 x 10⁻⁷ /h | |
| Notice | for max. 36,500 switching cycles/year and max. 60% contact load | |
| Safety Integrity Level (SIL), suitable for applications in | 2 | |
| Mission time | 20 Year(s) | |
| Common Cause Failure (CCF), minimum | 65 | |
Mechanical data PROTECT-IE-11-SK SHMERSAL HÃNG SCHMERSAL VIỆT NAM |
||
| Mechanical life, minimum | 10,000,000 Operations | |
| Mounting | Snaps onto standard DIN rail to EN 60715 | |
| Mechanical data – Connection technique | ||
| Type of connection | Screw connection, plug-in | |
| Terminal designations | IEC/EN 60947-1 | |
| Cable section, minimum | 0.14 mm² | |
| Cable section, maximum | 1.5 mm² | |
| Mechanical data – Dimensions | ||
| Width | 48 mm | |
| Height | 126 mm | |
| Depth | 61 mm | |
| Ambient conditions | ||
| Degree of protection of the enclosure | IP20 | |
| Degree of protection of the mounting space | IP20 | |
| Degree of protection of clips or terminals | IP20 | |
| Ambient temperature, minimum | -25 °C | |
| Ambient temperature, maximum | +55 °C | |
| Storage and transport temperature, minimum | -40 °C | |
| Storage and transport temperature, maximum | +85 °C | |
| Resistance to vibration to EN 60068-2-6 | 10…55 Hz, Amplitude 0.35 mm, ± 15 % | |
| Restistance to shock | 30 g / 11 ms | |
| Ambient conditions – Insulation values | ||
| Rated impulse withstand voltage Uimp | 0.8 kV | |
| Overvoltage category | III | |
| Degree of pollution to VDE 0110 | 2 | |
| Electrical data | ||
| Rated operating voltage | 24 VDC -15% / +20%, residual ripple max. 10 % | |
| Rated AC voltage for controls at DC minimum | 20.4 VDC | |
| Rated control voltage at DC, maximum | 28.8 VDC | |
| Electrical power consumption | 1.7 W | |
| Input resistance at Ue | 2,900 Ω | |
| Contact resistance, maximum | 0.1 Ω | |
| Note (Contact resistance) | in new state | |
| Drop-out delay in case of "emergency stop", maximum | 20 ms | |
| Pull-in delay at automatic start, maximum | 20 ms | |
| Electrical data – Safe relay outputs | ||
| Voltage, Utilisation category DC-13 | 24 VDC | |
| Current, Utilisation category DC-13 | 2 A | |
| Switching capacity, minimum | 10 VDC | |
| Switching capacity, minimum | 10 mA | |
| Switching capacity, maximum | 24 VAC | |
| Switching capacity, maximum | 2 A | |
Electrical data – Digital inputs |
||
| Input signal, HIGH Signal "1" | 19 – 28,8 VDC | |
| Input signal, LOW Signal "0" | 0 – 1 VDC | |
| Conduction resistance, maximum | 40 Ω | |
| Electrical data – Digital Output | ||
| Voltage, Utilisation category DC-12 | 24 VDC | |
| Current, Utilisation category DC-12 | 0.1 A | |
| Electrical data – Relay outputs (auxiliary contacts) | ||
| Switching capacity, maximum | 24 VDC | |
| Switching capacity, maximum | 0.1 A | |
| Electrical data – Electromagnetic compatibility (EMC) | ||
| EMC rating | EMC-Directive | |
| Status indication | ||
| Indicated operating states | Position relay K2 Position relay K1 Position relay K3 Position relay K3 |
|
| Other data | ||
| Note (applications) | Safety sensor Guard system Emergency-Stop button Pull-wire emergency stop switches |
|
xem thêm sản phẩm : http://pilz-vietnam.com/
Đánh giá (0)
Đánh giá
Chưa có đánh giá nào.