Mô tả
Product description BTL06WT cảm biến, BTL06WT balluff , cảm biến BTL06WT
The most important application for linear position sensors with a rod design is in hydraulic drive units. They are exceptionally well-suited for use in hydraulic cylinders for position feedback, for molding and rolling mills, or for elevator and hoisting technology. The sensors are installed in the pressure area of the hydraulic cylinder and have the same pressure resistance as the cylinder itself.
StyleRod series
Mounting partThreaded flange M18x1.5
Housing materialAluminum, Anodized
Magnets, number max.1
ConnectionConnector, M16x0.75, 8-pin
Analog outputAnalog, voltage 0…10 V Analog, voltage 10…0 V
Measuring range500 mm
Sampling frequency max.2000 Hz
Non-linearity max.±50 µm
Repeat accuracy± 10 µm
Operating voltage Ub20…28 VDC
Ambient temperature-40…85 °C
IP ratingIP67
Approval/ConformityCE, cULus, GL, EAC, WEEE
Basic features
Approval/Conformity CE
cULus
GL
EAC
WEEE
Magnets, number (factory setting) 1
Magnets, number max. 1
Electrical connection
Connection Connector, M16x0.75, 8-pin
Connection version axial
Polarity reversal protected Ub up to 36 V
Short-circuit protection to GND and to 36 V DC
Electrical data
Current consumption max. at 24 V DC 150 mA
Error signal Ua falling -0.5 V
Error signal Ua rising 10.5 V
Galvanic isolation no
Inrush current ≤ 500 mA/10 ms
Operating voltage Ub 20…28 VDC
Output current max. 5 mA
Output signal adjustable with calibration aid
using programming inputs
Overvoltage protection Ub up to 36 V
Switch-on delay max. 600 ms
Voltage-proof up to (GND to housing) 500 V AC
Environmental conditions
Ambient temperature -40…85 °C
EN 55016-2-3, Radiation For industrial and residential use
EN 60068-2-27, Continuous shock 150 g, 2 ms
EN 60068-2-27, Shock 150 g, 6 ms
EN 60068-2-6, Vibration 20 g, 10…2000 Hz
EN 61000-4-2, ESD Severity Level 3
EN 61000-4-3, RFI Severity Level 3
EN 61000-4-4, Burst Severity Level 3
EN 61000-4-5, Surge Severity Level 2
EN 61000-4-6, High-frequency fields Severity Level 3
EN 61000-4-8 Magnetic fields Severity Level 4
IP rating IP67, with connector
Relative humidity ≤ 90 %, non-condensing
Storage temperature -40…100 °C
Temperature coefficient typ. ≤ 30 ppm/K at 50% of nominal
stroke 500mm
Functional safety
MTTF (40 °C) 98 a
Interface
Analog output Analog, voltage 0…10 V Analog,
voltage 10…0 VBTL06WT cảm biến, BTL06WT balluff , cảm biến BTL06WT
Approval/Conformity CE
cULus
GL
EAC
WEEE
Magnets, number (factory setting) 1
Magnets, number max. 1
Electrical connection
Connection Connector, M16x0.75, 8-pin
Connection version axial
Polarity reversal protected Ub up to 36 V
Short-circuit protection to GND and to 36 V DC
Electrical data
Current consumption max. at 24 V DC 150 mA
Error signal Ua falling -0.5 V
Error signal Ua rising 10.5 V
Galvanic isolation no
Inrush current ≤ 500 mA/10 ms
Operating voltage Ub 20…28 VDC
Output current max. 5 mA
Output signal adjustable with calibration aid
using programming inputs
Overvoltage protection Ub up to 36 V
Switch-on delay max. 600 ms
Voltage-proof up to (GND to housing) 500 V AC
Environmental conditions
Ambient temperature -40…85 °C
EN 55016-2-3, Radiation For industrial and residential use
EN 60068-2-27, Continuous shock 150 g, 2 ms
EN 60068-2-27, Shock 150 g, 6 ms
EN 60068-2-6, Vibration 20 g, 10…2000 Hz
EN 61000-4-2, ESD Severity Level 3
EN 61000-4-3, RFI Severity Level 3
EN 61000-4-4, Burst Severity Level 3
EN 61000-4-5, Surge Severity Level 2
EN 61000-4-6, High-frequency fields Severity Level 3
EN 61000-4-8 Magnetic fields Severity Level 4
IP rating IP67, with connector
Relative humidity ≤ 90 %, non-condensing
Storage temperature -40…100 °C
Temperature coefficient typ. ≤ 30 ppm/K at 50% of nominal
stroke 500mm
Functional safety
MTTF (40 °C) 98 a
Interface
Analog output Analog, voltage 0…10 V Analog,
voltage 10…0 VBTL06WT cảm biến, BTL06WT balluff , cảm biến BTL06WT
XEM THÊM SẢN PHẨMCautomation.pitesvietnam.com/
Đánh giá (0)
Đánh giá
Chưa có đánh giá nào.