CB-018N2 ITOH DENKI Vietnam Japan Origin CB-018N2

CB-018N2 ITOH DENKI Vietnam Japan Origin CB-018N2

Driver Card
(1) Power connector
(1) Control connector

Connections
CN1 CN1
2 PIN connector
POWER
Male Connector on Card
WAGO #734-162
Female Connector for Wiring
WAGO #734-102
PIN Description
1 +24V DC Wire size
2 0V 28~14AWG
CN2
6 PIN connector
CONTROL
Male Connector on Card
WAGO #733-366
Female Connector for Wiring
WAGO #733-106
PIN Description
1 RUN (NPN)
Wire size:
28~20AWG
2 DIR (NPN)
3
Speed Selection Inputs (NPN)
Refer to Speed Change Table on page 6 4
5

6 Error Output (NPN)
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE Page 3 of 10
www.itohdenki.com ITOH DENKI, USA, INC.
info@itohdenki.com
Ph: 570.820.8811 2 Great Valley Boulevard
Fx: 570.820.8838 Wilkes-Barre, PA 18706 rev19-0603
SPECIFICATIONS
Connections (continued)
CN3
3 PIN connector for Motor
Male Connector on Card
JST #S3B-XH-A
Female Connector for Wiring
JST #XHP-3
PIN Description
1 Motor phase U – Red Wire size:
24~22AWG
Terminal pins:
JST #SXH-001T-P0.6
2 Motor phase V – White
3 Motor phase W – Black
1
PIN 1 indicator

1
SPECIFICATIONS
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE Page 4 of 10
www.itohdenki.com ITOH DENKI, USA, INC.
info@itohdenki.com
Ph: 570.820.8811 2 Great Valley Boulevard
Fx: 570.820.8838 Wilkes-Barre, PA 18706 rev19-0603
Control Wiring
Power to CN1 (24V DC) remains ON, control motor through CN2 (NPN signals only)
0V1 6

24V
Press down spring clamp in connector
with a small screwdriver.
Insert leads in proper order.
Lead should be stripped approx:
0.31~0.35”
WAGO connector (included) must be
inserted and/or pulled out carefully, so
as not to damage other parts.

xem thêm sản phẩm https://automation.pitesvietnam.com/

http://flowmeters-vietnam.com/